Store - DM Series - Dungeon Monsters
Please click on any of the pictures below for a larger image.
DM1a - Bugbear Warriors I (2)
This is a pair of Bugbear Warriors, armed with fauchard and mace & dagger, sculpted by Kev Adams. They stand at 34mm tall to the eyes. Supplied with 25mm square plastic bases.
Price - £11.00
DM1b - Bugbear Warriors II (2)
This pair of figures has been sculpted by Kev Adams. One Bugbear warrior is armed with a halberd and the other wields a hand-axe and a dagger. They measure around 34mm from ground to eye. Supplied with 25mm square plastic bases.
Price - £11.00
DM1c - Bugbear Warriors III (2)
This pair of figures has been sculpted by Kev Adams. One Bugbear warrior is armed with a partisan and the other wields a scimitar and a dagger. They measure around 34mm from ground to eye. Supplied with 25mm square plastic bases.
Price - £11.00
DM1d - Bugbear Chieftain
This is a leader character to complement the 3 sets of DM1 Bugbear Warriors. He's a hulking brute, standing at 36mm to the eyes, well armoured and armed with a huge battleaxe. Kev Adams is the sculptor, and the figure is supplied with a 25mm square plastic base.
Price - £8.00
DM2 - Gargoyles (2)
This is a pair of multi-part miniatures, sculpted by Paul Muller. They measure 35mm and 31mm tall to the eyes. Supplied with 25mm square plastic bases.
Price - £11.00
DM3a - Ogre I
This is a multi-part casting, sculpted by Kev Adams. He is 48mm tall to the eyes.
For a limited time, this model is sold with several hand/weapon options included (as shown in the photos above). Each pack will contain: 1 x Ogre body, 1 x Ogre head, 3 x Ogre right hands (spear, stone axe, club) and 3 x Ogre left hands (stone hammer, treasure sack, fist). A variant sculpt will be produced in the future which will feature humanoid feet and 2 new Ogre heads. Supplied with a 40mm round plastic base.
Price - £9.00
DM4a - Troll I
This is a multi-part casting, sculpted by Paul Muller. He is 36mm tall to the eyes. This pack includes 2 head options. Supplied with a 40mm round plastic base.
Price - £7.50
DM4b - Troll II
This is a second Troll model sculpted by Paul Muller. It is a multi-part sculpt which includes a body/legs piece, 2 arms and 2 different heads. The arms and heads will both fit the original DM4a Troll I model, allowing many different variants to be made. This figure stands at 37mm tall to the eyes, and is supplied with a 40mm round plastic base. The photo shows the sculptor's master model.
Price - £7.50
DM5a - Gnoll Warriors I (2)
This is our first pair of Gnoll Warriors. They measure 36mm and 33mm from ground to eye. Supplied with 25mm square plastic bases. Further head and weapon variants will be produced soon, as will a Gnoll Chieftain figure.
Price - £11.00
DM5b - Gnoll Warriors II (2)
This is the second pair of Gnoll Warriors, armed with a military fork and scimitar, sculpted by Paul Muller. They stand at 33 and 36mm tall to the eyes. Supplied with 25mm square plastic bases.
Price - £11.00
DM5c - Gnoll Warriors III (2)
This is the third pair of Gnoll Warrior variants, armed with a poleaxe and heavy spear, sculpted by Paul Muller. They stand at 33 and 36mm tall to the eyes. Supplied with 25mm square plastic bases.
Price - £11.00
DM5d - Gnoll Chieftain
This is a leader model for the band of DM5 Gnolls, around 37mm tall to the eyes. It was sculpted by Paul Muller, and is cast in pewter in 4 pieces (head, body, shield, sword arm) and is supplied with a square 25mm slotta base.
Price - £7.00
DM6 - Minotaur
This Minotaur measures 44mm from ground to eye, and is a four part casting. Supplied with a 40mm round plastic base.
Price - £8.00.
DM7 - Slimes, Oozes & Jellies (4)
This is a quartet of slimey dungeon horrors; a Slime, an Ooze, a Jelly and a Pudding, all sculpted by Paul Muller. They are 45mm (Slime & Pudding) and 35mm (Ooze & Jelly) across, and are supplied with 40mm round and 50mm square plastic bases.
Price - £9.00
DM7b - Slimes, Oozes & Jellies II (6)
This is another set of 'clean-up crew' models, featuring; a Black Pudding, a Green Slime, a colony of Yellow Mould, an Ooze (not shown in photo) and 2 small Ochre Jellies. They were sculpted by Paul Muller, and the pack includes 4 x 40mm and 2 x 25mm round plastic bases. The photo shows the sculptor's master models.
Price - £9.00
DM8 - Purple Worm
This is a huge model, around 380mm long and 45mm across at the head. It was sculpted by Paul Muller and Richard Scott, and is cast in 5 resin pieces (2 x head parts, 3 x body sections) and 1 pewter piece (tail section). Due to the sheer size and bulk of this model, some filling of joints may be required.
Price - £30.00
DM9a - Stirges (4)
This is a set of 4 different flying Stirges, with wingspans varying from 25mm to 29mm. They were sculpted by Kev Adams, and are cast in pewter. The pack includes 4 clear plastic flying bases.
Price - £8.00
DM9b - Stirge Swarm (20)
This is a pack of 20 flying Stirges, 5 of each of the four different models, with wingspans varying from 25mm to 29mm. They were sculpted by Kev Adams, and are cast in pewter. The pack includes 20 clear plastic flying bases.
Price - £30.00
DM10a - Troglodytes I
This is a pack of 3 Troglodyte models, sculpted by Jo Brumby, and cast in pewter. The 3 figures are multi-part castings, and they measure around 32mm to the eye. They are armed with a stone axe, wooden club and a pair of javelins. They are supplied with square 25mm plastic slotta-bases.
Price - £11.00
DM10c - Troglodyte Chieftain & Shaman
This is a pair of Troglodyte command figures; a Chieftain and a Shaman, sculpted by Snuurg. The Chieftain is a multi-part model with seperate arms, and they stand at 31mm and 34mm tall. They are supplied with 25mm square plastic bases. The photo shows the sculptor's master models.
Price - £11.00
DM11 - Shriekers & Violet Fungi (3)
This is a pack of 3 different Shriekers, sculpted by Kev Adams, and cast in pewter. A sprue of 'branches' is provided for conversion of Shriekers into Violet Fungi. The figures are supplied with round 25mm plastic slotta-bases.
Price - £11.00
DM12a - Harpies I (2)
This is a pair of Harpies, sculpted by Paul Muller, and cast in pewter. These models are multi-part castings, with seperate arms, wings and tail pieces. The figures are supplied with clear plastic 'flying' bases.
Price - £11.00
DM13a - Giant Frogs (3)
This is a trio of Giant Frogs sculpted by Jo Brumby. The pack features 3 different models and a seperate casting of an extended tongue! The figures are supplied with 25mm round plastic bases. The photo shows the sculptor's master models.
Price - £9.00
DM13b - Giant Frog Swarm (15)
This is a pack of 15 Giant Frogs sculpted by Jo Brumby. The pack features 5 of each of the 3 different models. The figures are supplied with 25mm round plastic bases. The photo shows the sculptor's master models.
Price - £32.50
DM14 - Medusa
This is a figure of a Medusa, sculpted by Kevin White. It is supplied with a 25mm round plastic base. The photo shows the sculptor's master models.
Price - £4.00
DM15 - Djinni
This is a model of a Djinni rising from a magic lamp atop a huge pile of treasure. It was sculpted by Matthew Bickley and it stands at 63mm tall. It is supplied with a 40mm round plastic base. The photo shows the sculptor's master model.
Price - £11.00
This miniature has been temporarily removed from sale due to a problem with the master mould. It is hoped that the problem can be rectified quickly, and the model should be back on sale soon.
DM16a - Gelatinous Cube (standard)
This is a Gelatinous Cube model, cast in clear resin. It measures approximately 40mm across each side, and is supplied mounted on a painted 50mm square resin base with a cracked stone paving design (but this base can be supplied seperately with an unmounted cube, if required).
Price - £12.50
DM16b - Gelatinous Cube (deluxe)
This is a Gelatinous Cube model, cast in clear resin, with a floating, undigested skeleton suspended inside it. The skeleton was sculpted by Paul Muller, and each model is hand-painted. The cube measures approximately 40mm across each side, and is supplied mounted on a painted 50mm square resin base with a cracked stone paving design (but this base can be supplied seperately with an unmounted cube, if required).
Price - £22.50
DM16a & b - Gelatinous Cube (standard & deluxe)
This is one of each of the two Gelatinous Cube models, at a reduced price.
Price - £30.00
DM17 - Hook Horror
This is a model of a Hook Horror, sculpted by Tre Manor and cast in 3 seperate pieces. It stands at 41mm tall and it is supplied with a 40mm round plastic base. The photo shows the sculptor's master model.
Price - £11.00